Screw, M2.5Ч3mm Inverter PCA Hinge Figure 2-8. Removing the LCD Module Reassembly Notes • Make sure the connector on the main display cable seats correctly on the LCD connector. • Install the LCD shield and three display brackets on the LCD module, then install the complete assembly onto the posts at the top of the display case. Lower the assembly into the case. • Route the LCD wires under the main display cable near the right hinge. HP OmniBook 7100 Removal and Replacement 2-13 .5×8 m (4) m S mm Displ crew Disp Scr L ay ca LCD End cap (2 )