Tray 3 can be heavy. Use two hands when removing and inserting Tray 3. Caution Remove the simplex unit or auto-duplex unit (whichever your printer has installed). To remove the simplex unit or auto-duplex unit, grasp the handle below the unit and pull it out of the printer. Set the unit aside. The printer contains metal parts that might be hot. Do not touch the metal parts inside the printer. Warning Look inside the printer. Grasp any jammed media with both hands and pull it towards you. Slide the simplex unit or auto-duplex unit firmly back into the printer until it snaps into place. Reinsert Tray 2 and Tray 3 into the printer. Use two hands to support Tray 3 while reinserting it.
Place the output bin on top of the Tray 2 case and push it into the printer until both sides snap into place. After you clear the jam, close all trays and the top cover, and press (select button). After the jam is cleared, the printer will attempt to reprint jammed pages when sufficient memory is available. jam recovery This printer automatically provides jam recovery, a feature that allows you to set whether the printer should attempt to automatically reprint jammed pages. The options are: • AUTO Printer will attempt to reprint jammed pages when sufficient memory is available. This is the default setting for the printer. • OFF Printer will not attempt to reprint jammed pages.
• ON Printer will reprint any jammed page. Additional printer memory is required for this setting, so overall printer performance may suffer. To improve print speed and increase memory resources, you may want to disable jam recovery. If jam recovery is disabled, the pages involved in a jam will not be reprinted. During the recovery process, the printer may reprint several good pages that were printed before the jam occurred. Be sure to remove any duplicated pages. Note to change jam recovery settings Press (select button) on the LCD control panel. use and maintain hp restricted 3-103