1.2.2. Setting of the Communications at the NB in Template This section provides settings for the Communications of this Template at the NB (COM2) as follows. 1.2.3. Settings of Digital Controller Specify the following items in Digital Controller. [Adjusting level] *1 Communications writing: ON (write permission) *Default is OFF (write protect) [Communications settings level ］ *1 Protocol selection : Modbus *Default is CompoWay/F Baud rate : 9.6kbps *Default is 9.6 kbps Communications parity : -- *Default is an even number. *1:
For the methods for adjusting level and Communications setting level of Digital Controller, refer to the Digital Controller E5CC/E5EC User’s Manual (H174-E1) Reference Connection Manual (V108-E1) . For changing the Baud rate at the NB, refer to the Programmable T erminal NB Series Host Specify the Baud rate exactly same as that of the Digital Controller. Wiring from the NB COM2 to the E5 C C Controller with RS485 ( Wiring from the NB COM2 to the E5 D C Controller with RS485 ) 3