When changing the communication setting level of E5 □ C, Refer to the following explanation. １） Method to modify the Communications settings The following procedure allows the communications setting to be modified. For the details, refer to the Communications Manual (H175-E1) . Change to the following Communication Settings: Protocol Setting = Mod Communication Unit = 1 (or 2 thru 4 if using 4 Controllers) Baud Rate = 9.6 Data Length = 8 Stop Bits = 1 Parity = None Wait = 20 Reference To modify settings of the Communication writing, perform it with panel operation or setting tools of the Digital Controller. 4