Removing a RAM Board (User-Replaceable) The OmniBook XE2 has 64 MB of RAM on the motherboard and has one RAM slot for installing additional RAM. Table 2-4. RAM Board Replacement Part Numbers The OmniBook’s computer chips are extremely static-sensitive. Static electricity can permanently damage computer chips. Carefully read the following information. Caution Handle the RAM module only by its edges. Otherwise, you may damage the module due to electrostatic discharge. Static electricity can permanently damage computer chips. It is therefore important to discharge the static electricity from your body before installing the memory module.
Discharge your body’s electricity by touching the metal shielding around the connectors on the rear of the OmniBook computer. Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove the RAM cover located on the bottom of the OmniBook using a Phillips screwdriver. Figure 2-2. Removing the RAM Module Cover 2-4 Removal and Replacement HP OmniBook XE2 Description Product Number RAM board, 32-MB SDRAM F1456A RAM board, 64-MB SDRAM F1457A RAM board, 128-MB SDRAM F1622A