Traveling with Your OmniBook Managing Power Consumption Hibernate Action Saves the current session to disk, then shuts down. Provides maximum power savings while still allowing you to recover the current session. When Press Fn+F5. Resume Press the blue power button to recover your current session. This takes several seconds. Hibernate can also occur automatically when: • Battery power reaches a critically low level. See “To respond to a low-battery warning” on page 53. • The timeout setting in the BIOS Setup utility is reached (default is 2 hours after System standby occurs). Off Action Turning off your OmniBook provides maximum power savings.
The current session is not saved and unsaved data will be lost . When Start, Shut Down, Shut down. Resume Press the blue power button to start a new session. This will take several seconds. Sometimes the system stops responding and you are not able to turn off the OmniBook as described above. To recover, use the following in the order listed. • If you are unable to access the Start menu, you can turn off the system by pressing and holding the blue power button for 4 seconds. • If holding the blue power button fails, insert a pen or straightened paper clip into the system-off button on the bottom of the OmniBook (see “OmniBook bottom view” on page 15). Setup Guide 51