WIRELESS REMOTE CONTROL Before using your new air conditioner, familiarize yourself with the wireless remote control. Turns the unit on or off. MODE ON/OFF Scrolls through operation modes as follows: AUTO COOL DRY HEAT FAN TEMP Increases temperate in 1°F (1°C) increments. Max. temperature is 86°F (30°C). NOTE: Press together & at the same time for 3 seconds to alternate the temperature display between °F & °C. Press to enter the energy efficient mode in a sequence of following: ECO GEAR(75%) GEAR(50%) mode ECO ECO/GEAR Previous setting SET OK Use to confirm the selected functions Scrolls through operation functions as follows: Fresh( ) Sleep( ) COMFORTSENSE( ) AP mode( ) Fresh...
TIMER Set timer to turn unit on or off The selected symbol flashes on the display area. Press OK to confirm. This feature avoids direct air flow from blowing on occupants. NOTE: This feature is available under cool, FAN and DRY modes only BREEZE AWAY TEMP Decreases temperature O O in 1 F(1 C) increments. Min. temperature is O O 60 F(16 C). CLEAN Boost Use to start/stop the Self Clean or Active Clean function (model dependent). Please refer to the user manual and installation manual for details. Selects fan speeds in the following order: Auto 20% 60% 40% 80% 100%. Press the TEMP or button to increase/decrease the fan speed in 1% increments.
FAN SPEED LED Turns indoor unit’s LED display and air conditioner buzzer on and off (model dependent), which creates a comfortable and quiet environment. Starts and stops the horizontal louver movement. Hold down for 2 seconds to initiate vertical louver auto swing feature. SWING Enables unit to reach preset temperature in shortest possible time BOOST Fig. 2 — Remote Control Functions Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations. 4