If you install your washer in an alcove or closet, the front of the closet must have two unobstructed air openings for a combined minimum total area of 72 sq.in. (465 sq.cm) with a minimum clearance of 3 in. (7.6 mm) at the top and bottom. A slatted door with equivalent space clearance is acceptable. Safety Instructions Features Operation Requirements Installation Instructions Washer Care Troubleshooting Washer Use 3 in . ( . ) 7 6 cm 3 in . ( . ) 7 6 cm Installing in an alcove or closet Minimum clearances between your washer and adjacent walls or other surfaces are: Either side: 1 in. (2.5 cm) Rear: 6 in. (15.2 cm) Closet Front: 2 in. (5.1 cm) Top: 24 in.
(61 cm) Gap between the end of water valve and the wall: 6 in. (15.2 cm) If you install your washer and dryer side-by-side in a closet, the closet front must have an unobstructed air opening of at least 72 square inches (465 square cm). 17 48 in.² * (310 cm²) 24 in.² * (155 cm²)