Never use the tub clean cycle when laundry is in your washer. This may damage the laundry or your washer. Caution Safety Instructions Features Operation Requirements Installation Instructions Washer Care Troubleshooting Washer Use With the tub empty, add one cup of chlorine bleach to the bleach dispenser. Turn the control knob to power on. Turn the cycle selector to Tub Clean . With the tub empty, add one cup of chlorine bleach to the bleach dispenser. Press the Start Pause button. Storing your washer You can damage your washer if you do not remove water from hoses and internal components before storage. To prepare your washer for storage:
Select the Quick Wash cycle and add bleach to the washer. Run your washer through the cycle without a load. Turn the water faucets off and disconnect the inlet hoses. Unplug your washer from the electrical outlet and leave your washer lid open to let air circulate inside the tub. Caution If your washer has been stored in below-freezing temperatures, allow time for any leftover water in your washer to dry out before use. 33