After cleaning the exhaust hood, check that the flapper or louvers move freely. Reassemble the exhaust duct and hood, checking that the joints are secure and sealed. Operate the dryer and verify that the exhaust air is not obstructed in the vent and that there are no leaks in the system. The outside exhaust hood should be cleaned more frequently to ensure proper operation. Dryer Safety Operation Requirements TROUBLESHOOTING Parts and Features CHECK THESE SOLUTIONS IF YOUR DRYER... If your dryer has any problems as followings, you can check as the solutions listed below before making a service call. This will help you save time and money.
Installation Instructions Dryer Use Appendix Dryer Care Troubleshooting 40 Problem Solution The unit doesn’t start. • Make sure the door is latched shut. • Be sure the power cord is plugged into a live electrical outlet. • Check the home’s circuit breaker and fuses. • Press the Start/Pause button again if the door is opened during the cycle. The unit doesn’t heat. • Check the home’s circuit breaker and fuses. • Select a heat setting other than Air fluff and the Temp selection is not on “No heat” • On a gas dryer, check that the gas supply is on. • Clean the lint filter and exhaust duct. • Dryer may have moved into the cool-down process of the cycle. Doesn’t dry.
• Check all of the above, plus... • Be sure the exhaust hood outside the home can open and close freely. • Check exhaust system for lint buildup. Ducting should be inspected and cleaned annually. • Use a 4" rigid metal exhaust duct. • Do not overload. 1 wash load = 1 dry load. • Sort heavy items from lightweight items. • Large, bulky items like blankets or comforters may require repositioning to ensure even drying. • Load may be too small to tumble properly. Add a few towels.