BASIC REQUIREMENTS Make sure you have everything necessary for the proper installation. A GROUNDED ELECTRICAL OUTLET is required. Refer to the “Electrical requirements” section. A POWER CORD electric dryer (except for Canada). GAS LINES (if a gas dryer) must meet national and local codes. The EXHAUST SYSTEM must be made of rigid metal or flexible stiff- walled metal exhaust ducting. Dryer Safety Operation Requirements LOCATION REQUIREMENTS 1. The dryer should be located where there is enough space at the front for loading the dryer, and enough space behind for the exhaust system. Parts and Features 2. This dryer is factory-ready for the rear exhaust option.
If you want to changetheventlocation,see Change the dryer vent location section. 3. Make sure the room in which the dryer is located has enough fresh air. The dryer must be located where there are no air-flow obstructions. Ambient temperature shall not be lower than 33°F. Installation Instructions Dryer Use Appendix Dryer Care Troubleshooting 4. For gas dryers, adequate clearance must be maintained as noted on the data plate to ensure adequate air for combustion and the proper dryer operation. 5. The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.
The dryer area must be kept clear of combustible materials, gasoline, and other flammable vapors and liquids. A dryer produces combustible lint. The area around the dryer should be kept lint-free. 9