Downloaded from https://www.everyspec.com MIL-STD-100E NOTICE 2 202.2.1 Book-form requirements and limitations. Drawings in book-form shall use A, B, C, and G size sheets, and may include graphic delineations. textual data, tables and tabulations. A, B, and G size sheets may be intermingled in a single drawing. However, C size sheets shall not be intermingled with other sheet sizes. See 604 for revision procedures. Drawings in book-form shall not be prepared to circumvent the requirements for furnishing the types of drawings normally required for the delineation of an item or system. 202.3 Combination of drawing types.
The characteristics of more than one drawing type may be combined into a single drawing provided that the resulting combination includes the data required by the individual drawing types. 202.3.1 Application. Normally several types of engineering drawings and associated lists are required to completely define the end–product requirements of an item. As a minimum, a combination of detail and assembly drawings may suffice to define these requirements. However, as the complexity of the item increases, specialized engineering drawings may be required to provide for full engineering description.
As a rule, combinations of detail, assembly, control, installation and diagrammatic drawings will provide the necessary engineering description. In certain cases, ancillary drawings (see 204.1) may be required for management control, logistic purposes, configuration management, manufacturing aids, and other unique functions as might be required by a design or procuring activity. 203. Pictorial drawing. When three dimensional depiction is specified instead of or as a supplement to multiview orthographic drawings, the required pictorial drawing shall be in accordance with ASME Y14.4M. 200-2 Supersedes page 200-2 of 30 September 1991