MIL-STD-100E — MIL-STD-100E Notice 2: Engineering Drawing Practices PDF Download

Downloaded from https://www.everyspec.com MIL-STD-100E NOTICE 2 403. Drawing number. The drawing number consists of letters, numbers or combination of letters and numbers, which may or may not be separated by dashes. The number assigned to a particular drawing and the CAGE Code provide a unique drawing identification. The drawing number shall be assigned from numbers controlled by the design activity whose CAGE Code is assigned to the drawing. 404. Part or identifying number The Part or Identifying Number (PIN) shall consist of letters, numbers or combinations of letters and numbers.

which may or may not be separated by dashes or slashes that are assigned to uniquely identify a specific item. The PIN shall be or shall include the design activity drawing number, and may include a suffix identifier (if applicable). (See 406.6.) The PIN assigned to a specific item and the CAGE Code assigned to the drawing of the item provide a unique item identification. 405. Find number A find number may be assigned to an item for the purpose of cross-referencing an item identified in a parts list or table on the drawing to the location of the item in the field of the drawing, in lieu of using the PIN in the field of the drawing.

Item identifications for- parts or assemblies that are assigned a find number shall be itemized in the integral or separate parts list or in a table on the drawing. Items identified as substitutes shall be assigned the same find number as the items for which they may be substituted. Find numbers are for cross-referencing purposes only within the drawing and associated lists, and shall not be used for procurement or marked on the items they represent or the assemblies containing the items. Reference designations in accordance with ANSI/IEEE STD 200 and IEEE STD 315 may be used as find numbers. See ANSI Y14.34M. 406. Identification requirements.

All drawings, associated lists and items shall be assigned identifications as follows: 406.1 New drawings and associated lists. New drawings and associated lists shall be assigned a CAGE Code in accordance with 401 find 406.4: drawing number-s in accordance with 403 and 406.5. Items shall be assigned PINs in accordance with 404, 406.6 and 406.10. 400-2 Supersedes page 400-2 of 30 September 1991