Downloaded from https://www.everyspec.com MIL-STD-100E NOTICE 2 Condition 1. Performance or durability is affected to such an extent that superseded items must be discarded or modified for reasons of safety or malfunction. Condition 2. Parts, subassemblies, or complete articles are changed to such an extent that the superseded and superseding items are not interchangeable. Condition 3. When superseded parts are limited to use in specific articles or models of articles and the superseding parts are not so limited to use. Condition 4. When an item has been altered, selected, or is a source control item (see Chapter 200 and ASME Y14.24M). Condition 5.
When a repair part within an item is changed so that it is no longer interchangeable with its previous version, it shall be assigned a new PIN. A new PIN shall also be assigned to the next higher assembly for the changed repair part and to all subsequent higher assemblies up to and including the level at which interchangeability is r-e-established. 406.13.1 Compute r program. When an item is changed in such a way that it necessitates a corresponding change to a computer- program for operation. self test or maintenance test, the PIN of the item and its next assembly and all progressively higher assemblies shall be changed up to and including the assembly where computer programs are affected.
406.14 Changes not requiring new identification. When a part or assembly is changed in such a manner that conditions of 406.13 do not occur, the PIN shall not be changed. Under no condition shall the PIN be changed only because a new application is found for an existing part. When an item has been furnished to the Government. the applicable PIN shall not be changed unless conditions in 406.13 apply. However, when a design activity desires to create a tabulated listing or a standard because of a multiple application of an item, the aforementioned need not apply. The superseded drawing shall identify the document which superseded it.
The superseding document shall identify the PINs replaced and provide a complete cross-reference of superseded PINs to replacement PINs. 400-12 REPRINTED WITHOUT CHANGE