Downloaded from https://www.everyspec.com MIL-STD-1311D 5. DETAILED REQUIREMENTS This section is not applicable to this standard. 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Metric equivalents. The equivalent metric dimensions provided on each drawing are for general information only. These metric dimensions are rounded off to the nearest .01 millimeter (mm) and are based upon 1 inch = 25.4 mm. 6.2 Subject term (key word) listing.
amplifier image converter photomultiplier radiation counter traveling wave cathode ray klystron phototube receiving vacuum Electron magnetron power test vidicon gas switching microwave pulse thyratron voltage regulator grid noise source pulse modulator transmitting 6.3 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations.
Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. 14