Downloaded from https://www.everyspec.com MIL-STD-1311D LEAKAGE POWER METHOD 4452A (Gas-switching tubes) 1. Purpose. The purpose of this test is to measure the amount of energy contained in the spike portion, and the peak power level of the flat portion of the leakage pulse through a gas-switching tube during high level operation. 2. Test circuits. 2.1 Basic circuits. The basic test circuits for measuring spike-leakage energy and flat-leakage power are shown on figure 4452-1. FIGURE 4452-1. Basic circuits for leakage power measurements. 2.2 Power measuring devices.
The power measuring device in each of the basic circuits (figure 4452-1) may be simply a power meter with a thermistor, or it may be an oscilloscope with auxiliary equipment. A typical arrangement of equipment using an oscilloscope is shown on figure 4452-2. METHOD 4452A 4452-1 18 August 1970