Downloaded from https://www.everyspec.com MIL-STD-1311D FIGURE 4452-4. Equipment layout No. 1 for leakage power measurements on tubes for branched duplexer applications. 2.3.2.2 A circuit in which the basic circuit of figure 4452-1(a) is combined with a branch circuit containing an oscilloscope, and another branch circuit containing a signal generator which is used for calibrating the oscilloscope, is how on figure 4452-5. An optional power monitoring circuit is included. The signal generator branch may be removed once the oscilloscope has been calibrated in terms of power level. on tubes for branched duplexer applications. 2.3.3 Tubes terminating the line.
2.3.3.1 A circuit in which the basic circuit of figure 4452-1(b) is combined with a thermistor and a power meter is shown on figure 4452-6. A power monitoring circuit containing power meter No. 2 in included. FIGURE 4452-5. Equipment layout No. 2 for leakage power measurements METHOD 4452A 4452-3 18 August 1970