Downloaded from https://www.everyspec.com MIL-STD-1311D METHOD 5429 RESOLUTION (Vidicons) 1. General. a. The tube shall be tested in a camera system with associated monitors as shown on the block diagram of figure 5426-1. b. Align the tube in accordance with method 5437. c. Cap lens and adjust black level for about 20 percent setup. Uncap lens and adjust video gain control to see all steps of grey scale on ECA resolution chart, 1956, or equivalent, or as specified. 2. Center resolution. With Ec3 adjusted for balanced horizontal and vertical resolution, the resolution in the center of the pattern shall not be less than the specified limit. 3. Corner resolution.
Without readjusting Ec3, the resolution in the four corners of the pattern shall not be less than the specified limit. METHOD 5429 5429-1 28 March 1975