Downloaded from https://www.everyspec.com MIL-STD-31000A performance. It consists of applicable technical data such as models, drawings, associated lists, specifications, standards, performance requirements, QAP, software documentation and packaging details. 3.1.38 Technical data package document. A document that is part of a TDP element. 3.1.39 Technical data package element. A data product that is an actual component of the TDP. A TDP element provides all or part of the information necessary to define the item being documented by the TDP. 3.1.40 Technical data package data management product. A data product that is used to monitor and control the development and maintenance of the TDP.
A TDP data management product contains information about the TDP rather than the item being documented. 3.1.41 Verification. All examinations, tests and inspections necessary to verify that an item meets the physical and functional requirements for which it was designed, to verify that a component, part or subassembly will perform satisfactorily in its intended application, or that an item conforms to specified requirements. 4. GENERAL REQUIREMENTS. 4.1 General. This section covers general requirements for Technical Data Packages. TDPs define the physical and functional characteristics of the accepted configuration of the item and its subordinate assemblies, subassemblies, and parts thereof.
TDP levels, types, elements and TDP data management products shall be identified in accordance with this standard and applicable Data Item Descriptions (DID), as tailored and imposed through the TDP Option Selection Worksheet (Figure 2) or as defined in block 16 of the 1423, Contract Data Requirements Lists (CDRL) in contracts, purchase orders, and Military Interdepartmental Procurement Requests (MIPRs).In addition, provisions for the inclusion of minimum software version(s) required to view / open the TDP data set and label the file(s) / media accordingly for usability / accessibility shall be made. See Appendix A for guidance on selection of TDP elements and data management products.
4.2 TDP levels. TDP levels provide for a natural progression of a design from its inception to production. A particular TDP Level may be ordered to define a conceptual design, a developmental prototype or limited production design, or the highest type of engineering drawing/model required for quantity production of the item or system by the original developer or any other capable producer. TDPs shall consist of one of three Levels: (1) Conceptual Level (2) Developmental Level (3) Production Level 4.3 TDP types. TDP Types describe the form and format of the technical data and shall consist of one or more of the following types: 4.3.1 Type 2D:
2-Dimensional (2D) Technical Data Package 4.3.2 Type 3D: 3-Dimensional (3D) Technical Data Package. Type 3D comes in one of the following type subsets: 9