U.S. Department of Defense · MIL-STD-709D w/CHANGE 1 · 29 pp.
U.S. Department of Defense MIL-STD-709D w/CHANGE 1 Ammunition Color Coding Standard Manual PDF
Related manuals
Document text
Downloaded from https://www.everyspec.com NOT MEASUREMENT SENSITIVE MIL-STD-709D w/CHANGE 1 03 May 2011 SUPERSEDING MIL-STD-709D 16 March 2009 DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD AMMUNITION COLOR CODING Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or ardecstdzn@conus.army.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST online database at https://assist.daps.dla.mil . AMSC N/A FSC: 1395 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from https://www.everyspec.com MIL-STD-709D w/CHANGE 1 FOREWORD 1. This Military Standard is approved for use by all Departments and Agencies of the Department of Defense. 2. This standard covers the procedure for establishing ammunition color coding. 3. The changes in this document update the definitions for practice (LIGHT BLUE) and dummy (BRONZE) ammunition and also included a LIGHT ORANGE color for exploding and/or bursting grenades without HE. A future and more comprehensive update to this standard is in progress, which will address discrepancies between NATO, USAF, and USN color standards and update the color definitions for all ammunition. ii
Downloaded from https://www.everyspec.com MIL-STD-709D w/CHANGE 1 CONTENTS PARAGRAPH PAGE FOREWORD ii 1. SCOPE 1 1.1 Scope 1 1.2 Classification 1 2. REFERENCED DOCUMENTS 1 2.1 General 1 2.2 Government Documents 2 2.3 Order of Precedence 2 3. DEFINITIONS 3 4. GENERAL REQUIREMENTS 3 4.1 Colors 3 4.2 Application of color coding 21 4.3 Special Coding 21 4.4 Materials 24 4.5 Data Marking 24 4.6 Packaging and Packing 24 5. DETAIL REQUIREMENTS 24 6.
NOTES 24 6.1 Intended Use 24 6.2 Acquisition requirements 24 6.3 International standardization agreement implantation 24 6.4 Tracer 24 6.5 Color Effect 24 6.6 Definitions 25 6.7 Subject term (key word) listing 25 6.8 Revision/amendment history 25 6.9 Changes from previous issue 26 TABLE PAGE I Ammunition Color Code and Application for Tier I 4 II Ammunition Color Code for Tier II 19 III Application of Color Coding for Tier II 22 iii
Downloaded from https://www.everyspec.com MIL-STD-709D w/CHANGE 1 1. SCOPE 1.1 Scope. This standard covers a color coding system for ammunition. 1.2 Classification. The following ammunition tiers use the color coding system: a. Tier I – Used for ammunition of a caliber .50 and below with the exception of ammunition under 1.2.1. b. Tier II – Used for ammunition of a caliber 20mm and above with the exception of ammunition under 1.2.2. 1.2.1 Exceptions to Tier I. This standard does not apply to the following ammunition: a. Blank Ammunition b. Proof or high pressure test ammunition c. Revolver ammunition d. Shotgun ammunition e. .22 caliber f.
.30 caliber (carbine and rifle) 1.2.2 Exceptions to Tier II. This standard does not apply to the following ammunition: a. Blank Ammunition b. Cartridge cases c. Propelling charges for fixed, semi-fixed, separated and separate loading ammunition d. Commercial ammunition and explosives e. Sectionalized or display models f. Ammunition devices required to be inconspicuous when exposed to close range observation g. Ammunition components and demolition accessories which normally do not require color coding for identification purposes h. Fuzes i.
Cartridge or propellant-actuated devices, initiators, igniters, detonators and other components of aircrew escape systems or aircraft external stores ejection systems j. Proof or high pressure test ammunition k. Inert ammunition used in drill type training or for clearing automatic weapons and for which no protective coating is required or which has a cadmium plate/chromate treatment for the protective coating l. War reserve and training nuclear weapons and their containers. Required marking for these items are contained in the appropriate Joint Atomic Weapons Publications m.
Ammunition in containers adequately identified as to contents and which ammunition is not visible to the user during handling or firing operations 2. REFERENCED DOCUMENTS. 2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While very effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all 1