MIL-STD MIL-STD-810B Method 513.1 / 514.1 — MIL-STD-810B Method 513.1 Acceleration & 514.1 Vibration Test Standard PDF

. , Downloaded from https://www.everyspec.com MIL-STD-81OB 15 June 1967 ,/”- h.9 Procedure IV. - 14.9.1 ~. - Proceed the same as in 4.5.1.1, 4.5.1.2, ~d h.5.l.3. The’test level shall be according to one specified cqve B or AB from figme 514.1-L. Test tine schedules shall be as specified for part 1 of Procedure.IVas shown in table 51b.1-IV. 4.9.2 ~. - Proceed the same as in J.5.1.3. The test level shall be eccordin~ to cur.reN from figure 51b.l-h. Test time schedules shall be as specified for part 2 of Procedure IV as shown in table 514.1-IV. b.9.3 Part 3. - Proceed the same as in b.5.2. The test level shall be according to curve AE from figure 514.l-k.

., Test time schedules shall be as specified for part 3 of Procedure IV as shown in table 514.1-IV. b. 10 Procedure V. - 14.1o,1 Part 1. - Proceed the same as in h.5.l.3. The test level shall be acccrd- ing to one sp-d curve P through U from figure 51b.1-5. Test time schedules shall be as specffied for part 1 of Procedure V as shown in table 514.1-V. k.10.2 Part 2, - Proceed the same as in 4.5.2. The test level shall be according to one specified curve Al through AP from figure 51h.1-5. Test time schedules shall be as specified for part 2 of Procedure V as shown in table 5111.1.v. b.11 procedure VI. - 4.11.1 ~.

- Test items normally provided with vibration isolators shall be vibrated with the isolators in place as in 4.5.1.3. Test levels shall be accordingto (F... one specified curve P through U from figuye 51b,1-5. Test time schedules shall be as specified for part 1 of Procedure VI as shown in table 514.1-V. b.11.2 Part 2. . Test items normally provided with vibration isolators shall be vibrated in accordancewith b.5.1.3with the vibration isolators removed but including any other required holding devices. Test levels shall be according to curve N from figure 51h.1-5. Test time schedules shall be as specified for part 2 of ProcedureVI as shovn in table 51b.l-V. 4.11.3 ~.

- With vibration isolators in place, proceed the same as in 4.5.2. Test levels shall be according to one specified curve Al through AP from figure 514.1-5. , Test time schedules shall be as specified for part 3 of Procedure VI as shown in table 514.1-V. 4.12 Procedure VII. - L.12.1 part 1. - Proceed the s~e as in 4.5.1.3. Test levels shall be according to curve N from figure 51b.1-5. Test time schedules shall be as specified for Prt 1 of Procedure VII as shown in table 514.1-V. .. 51k.1-9 FfE1’SOD51b.1 20 October 1%9 ‘ c . . I 1