., Downloaded from https://www.everyspec.com MII#STtX810B , ~ -.!-, .. : .’-- 15 “Jtie:1967 (-; ME’ITIOD515.1. .,. ,. ... ACOUSTICAL NOISE 1. Purpose. - The acousticalnoise test is performed to determine the effects on equipment of acoustic sound fields that are characteristicof aircraft, miseile and other high performancevehicles. In general, equipments located in areas where DOise levels are 130 dS overall or less will not require testing to noise environ- ments. This method is primarily for use with equipmentmounted internal to the vehicle structure, but may also be applicable for use with externally mounted equipment.
l’he acoustical noise test is not a substitute for the conventional.sinusoida.l or random vibraticn test. 2. Apparatus.- A reverberationtype test chamber, suitableformed and propor- tioned to produce a diffuse sound field end a uniform sound energy density throughout the enclosure. A noise generatorto produce or simtite abroad band noise spectrum. Measuring equipment suitable to accomplish these tests, includingan octave band analyzer. 3. Procedure.- , 3.1 Definitionsand terms.
- A comprehensivelist of standardterminology is contained in United States of America Standards Institute documentS 1.1-1960, titled I!Acou~tica~ Temin~logy (IncludingMechanical Shock and Vibration).“ 3.2 Criteria for application.- Some equipment is insensitiveto aco-usticstimu- lation even at very high levels. Other equipmentmay respond in a mmner that will ,-.. modify.or dis+mpt the equipment !lnction end in extreme cases mechanical failure may resuit. Equipmentthat is sensitiveto vibration is usually sensitiveto sound field exposure. For this reason a suitable vibration test is often a good indicator of (.. acoustic sensitivity.
Howe~er, it is possible that high frequencyresonances of some r~sponding equipuentelements may be overlookedduring the vibrationtest due to the high frequency limitationsof the shaker and vibration attenuationof the fiiture and the equipment under test. Of importante is the fact ‘thatsome equipment may possess both sensitive and insensitive characteristics, @ad it may be difficult to ascertain, before a test is performed,whether the equipment is sensitivet~ acoustic stimulation. The following criteria are presented as a guide to initially determinewhether &quip- ment is sensitive to acoustic stimulation. Such criteria cannot be considered as the only determining factors.
The final.decision, whether to perform an acoustical noise test, must be supplementedby such additional factors as a descriptionof the charac. teristics and durntion of the end use acoustic environment,the locatioq of the eqlIiP- ment within the vehicle structure, and a considerationof specielmounting .meeneor pqpt~ctive enclosuresemployed for the eqq+prne!t.. _ ___ ~- -. . ...~,. . .. . . .. -..1 . . ...515;1-1.:- .->. : ... .....1S.I-! -2---2 , .::.Z(J~a::r 5;;;; ...—. —..—... .—... ..,.--4.??s2s2. !=~ ..--.–--...-:-–. .—-—.A--_i..–A–_ :,.:...; .. . . . .,,: .., i .,.., , : , ,., ,..,... ~,.”.”.. . ...) ..