MIL-STD MIL-STD-810B Method 513.1 / 514.1 — MIL-STD-810B Method 513.1 Acceleration & 514.1 Vibration Test Standard PDF

,L-. .. KIL-S’IW81OB 15 June 1967 ~- Downloaded from https://www.everyspec.com 3.&.1 perforwce of test.- The G level determined for the test shall be applied alOns at least thee ~t~lly p=~ndicu~r =es in two opposite directions along each &s. The test time duration in each direction shall be at least 1 minute following centrifuge stabilization. A test time of 1 minute is usually sufficientto determine proper operation; however, the test time may be increased. This test time app~es to centrifugeapparatus only. Cther appsratus may require modificationof the above test time duration.

‘l’hetest item shall be operatedbefore, during and at the conclusion,~ of each test, and the results compared with the data obtained in accordance with section 3, General Requirement, pragraph 3.2.1. The test item shall then be inspacted as spcif ied in section 3, General Requirements, pmagraph 3.2.L. 4. Sumuary.- The following details shall be specifiedin the equipment specificationor test plan. (a) Procedure number if both procedures are not required (see 3). (b) Pretest data required(section3, General Requirements, paragraph 3.2.1). (c) Test level and test time (see 3.3 and 3.L). (d) ~wth of time required for operation and measurements. ~: 513.1-5 M311fOD513.1 20 October 1969 ,, (.