U.S. Department of Defense MIL-STD-810C — MIL-STD-810C Environmental Test Methods Standard — PDF Manual Download

Downloaded from https://www.everyspec.com MIL-STD-81OC i 4 3.3.7.1 Determination of overall mean squared random noise spectrum (OAMSR). The OAMSR of the spectrum is determined as follows: oAt”lsR= Al + A: + A: (See figure 519.2-13) (9) A1=G r ~ax [fc-fb] (lo) where: f = o.7fo, .,c fb = 600 Hz A: = f. Gr mu [Ib-Ial (11) where: f/f = a and f/f- = b (See figure 519.2-13) 0 0 [Ib-1;] is the difference in ordinate values of I at f/f = a and f/f = b (See figure 519.2-14) 0 0 A:=f ~> Gr max [Id-Icl (12) where: f/f , = c and f/f , = d (See figure 519.2-13) Id-I= is the difference in ordinate values 0 0 1 at f/fo. = c and = d (See figui’e519.2-15) 3.3.7.1.1 Determination of [Ib-Ia] and [Id-It].

Refer to figure 519.2-16 ind from a known value of D, select from the curve an appropriate value of @f. From this curve pick off the appropriate values of the ordinate, 1, at f/f. = a and f/f. = b. Note that the properties a and b are determined from figure 519.2-13. Substitute these values in equation (11). [Id-It] is determined in the same manner except figure 519.2-17 is used to obtain Sf’; the slope factor for the high frequency random surface., Figure.. S19.2-15 is then used to obtain Id and Ic. Substitute in eq. (12). MSTHOD 519.2 519.2-8