Downloaded from https://www.everyspec.com MIL-STD-8,1 OD 19 July 1983 Step 9. Conduct a complete visual examination of the test item. Step 10. Document the results. Step 11. 6. Conduct an operational checkout of the test item aa in II-2.2, step Step 12. Document the results. Step 13. Compare these data with the pretest data. II-4 TO BE test item has been subjected. a. Previous test methods to which the b. Results of each performance check, photographs, if applicable),,and comparison visual examination (and with the failure criteria. ( 1 ) “Pretest. (2) During test. (3) Post-test. o c. Length of time required for each performance check.
d.,, Statua.of the test item for each visual examination. e. Defects noted during visual examinations. f. it.ern. Clothing and special equipment used to set up or disassemble the test ,. Test temperatures. , h. Duration OF each exposure. manipulation tests. ,. i. Appropriate anthropometric measurements of personnel performing .s j. Temperature-time-versusdata (test item and chamber). k. Initial failure analysis. .+ MBTHOD 502.2 19 July 1983 502.2-13