Before Starting Maintenance Work Checks Before Maintenance Work Do not place tools, fasteners, or the like on the belt or near the pressure roller or print head. Doing so could cause them to be entangled in the belt, pressure roller, or print head, damaging this machine. Before turning the power on, check that there is nothing left near the moving parts, such as on the belt or near the print head. Front 1 Open the front cover of this machine. 2 Check that there are no tools, fasteners, or the like left on the belt or near the car- riage or print head. Carriage operating area Belt Print head 3 Close the front cover. Rear 1 Open the rear cover of this machine.
2 Check that there are no tools, fasteners, or the like left near the belt or the pressure roller. Pressure roller Belt 3 Close the rear cover. 14