Name and Function of Each Part ML-32000-340 / ML-16000-180 15 No. Name Description 1 Scan spindle Spindle along which the print head moves from side to side. 2 Head stroke sensor Detects foreign material on the belt as well as folds and wrin- kles in the fabric. 3 Print head Equipped with the print head used for printing on fabric. 4 Cooling fan Lowers the temperature of the print head control substrate. 5 Flushing plate The print head flushes the ink here. 6 Fabric peeling prevention bar This bar prevents the peeled part of the fabric from floating up when winding the printed fabric in the dryer. Adjust the height of the bar whenever changing the fabric type or thickness.
For more information, refer to "Adjusting the Fabric Peeling Pre- vention Bar" on Page 114. 7 Cleaning station Caps and wipers are located at the top, for performing cleaning and replacement.