Maintenance Other Maintenance Applying anti-foaming agent to the belt cleaning unit (only when using acid ink) If you use acid ink, foam may be generated in the belt cleaning unit and the cleaning tank may overflow. Follow the steps below to apply anti-foaming agent to the belt cleaning unit. 1 Check that the machine is off. For more information, refer to " Power Off/Air Pressure Release Status " on Page 107. 2 Remove each screw at the two locations that secure the belt cleaning unit. 175 Frequency Apply once every two days before beginning work. However, apply as needed when ink sticks to the belt and foams. Ink is especially prone to foaming after the following operations.
• When printing on fabrics that are prone to ink bleed-through • When printing at a print width of 1500 mm or more • When printing at print length of 3700 m or more Required Items Personal protective equipment (protective gloves and clothing, eye protection), wipe cloths, plastic containers, anti-foaming agent, and brushes