Name and Function of Each Part Rear Panel 39 No. Name Description 1 Slack detection switch Use this switch to change the operation of the slack detection sensor. Off: Disable On: Enable 2 Feeding unit Off button (Off) Turns off signals from external devices, such as the feeding unit. 3 Feeding unit button (On) Turns on signals from external devices, such as the feeding unit. 4 Backfeed button Press and hold this button to feed the belt in the reverse direction. 5 Feed button Press and hold this button to feed the belt in the forward direction. Selecting [Pressure Roller] on the control PC will allow you to push on the fabric using the pressure roller while the feed button is held.
Selecting [Belt Cleaning] will allow you perform belt cleaning while the feed button is held. 6 Belt speed volume Use this knob to adjust the belt speed. 7 Pause button Printing is paused and the print head stops at the cleaning station. 8 Fabric end sensor button Printer detects the end of the fabric and then pauses printing.