Configuring On-Change gRPC Subscriptions SUMMARY STEPS 1. enable 2. configure terminal 3. telemetry ietf subscription id 4. stream yang-push 5. filter xpath path 6. update-policy { on-change | periodic period } 7. encoding encode-kvgpb 8. receiver ip address ip-address receiver-port protocol protocol profile name 9. end DETAILED STEPS Procedure Model-Driven Telemetry Configuring On-Change gRPC Subscriptions Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 telemetry ietf subscription id Example:
Device(config)# telemetry ietf subscription 8 Creates a telemetry subscription and enters telemetry-subscription mode. Step 4 stream yang-push Example: Device(config-mdt-subs)# stream yang-push Configures a stream for the subscription. Step 5 filter xpath path Example: Device(config-mdt-subs)# filter xpath /iosxe-oper:ios-oper-db/hwidb-table Specifies the XPath filter for the subscription. Step 6 update-policy {on-change | periodic period} Example: Device(config-mdt-subs)# update-policy on-change Configures an on-change update policy for the subscription. Step 7 encoding encode-kvgpb Example: Specifies kvGPB encoding. Model-Driven Telemetry 44