Introducing the Victron Multi HS19 Solar A 19-inch enclosure combining a 15kW high-voltage 3-phase inverter/charger and four MPPT high voltage solar trackers rated at 8kW. The integrated design simplifies installations, saving time and money. Lightweight, efficient, and quiet in operation with low standby power consumption due to high-frequency technology and a new design. Easy mounting with the 19- inch housing, sliding into the same rack as the batteries. Versatile Ideal for off-grid, peak-shaving, backup, or feed-in applications.

Powerful inverter/charger The Multi HS19 Solar features a powerful sinewave inverter/charger at its core with seamless transitions between inverting, grid feed-through, and charging. This bidirectional capability allows charging the battery when excess solar power or AC supply is available or converting from the battery when needed. Four individual solar inputs Four individual 8kW, MPPT solar trackers with a wide MPPT voltage range of 100-600V and a 300V startup voltage, totalling a PV capacity of 32kW at 600V. Battery Connects to managed CAN-bus batteries via dedicated Battery CAN-bus ports.

Supports battery banks from 650 up to 1000V, reducing battery cable thickness and installation costs. Supports a maximum charge power of 33kW at 800V. Communication and Control Comprehensive monitoring options include a display for reading operational status, Bluetooth connectivity via the VictronConnect app for configuration, VE.Can communication port for remote monitoring via a GX device on the VRM portal. Equipped with a remote on/off terminal and programmable relay for automated actions, such as starting a generator when the battery is low. Multi HS19 Solar 15k VictronConnect app Victron Energy B.V. E-mail:

sales@victronenergy.com www.victronenergy.com Multi HS19 Solar 15k High voltage Inverter/charger with solar input www.victronenergy.com

Page 1

Accessories Cerbo GX Ekrano GX VE.Can to CAN-bus BMS cable Victron Energy B.V. E-mail: sales@victronenergy.com www.victronenergy.com TECHNICAL SPECIFICATIONS Multi HS19 Solar 15k Max.

AC input and pass-through current 32A INVERTER Inverter apparent/rated power 15kVA/15kW Continuous output power up to 40°C (1) 15kW Peak Power (2) 22kW (5s) Inverter peak AC current 32A (5s) Continuous AC current per phase (1) 22A RMS AC voltage 400Vac ± 10%, 3-phase AC frequency (range) 50/60Hz (45-65Hz) Total harmonic distortion Maximum efficiency (3) 98% No load power at 650V battery voltage 50W AC connections L1, L2, L3, N, PE Number of AC inputs / outputs 1 input / 2 outputs SOLAR Maximum open circuit voltage 600V Max.

short circuit / MPP current per string 20A / 13.5A Number of independent trackers / strings 4 / 4 MPPT operating voltage range 100 - 600V Minimum solar voltage for wake-up (4) 300V Maximum total power per string (1) 8kW (32kW total) Maximum efficiency 99% BATTERY Operating voltage range 650 - 1000V Maximum discharge current 25A Maximum charge current 41A Communication CAN Supported batteries (5) Batteries supporting Victron HV Protocol FEATURES & PROTECTION Parallel operation No (7) Overvoltage category PV II / AC III Environment condition Indoor, conditioned Protections PV overvoltage / PV over-current / DC insulation resistance / Residual current monitor unit / AC over-current GENERAL 19" rack height / Depth / Weight 4U / 71cm / 26.5Kg AC connectors Push-in spring connectors:

Rigid cable 0.2mm2 to 10mm2 Flexible cable 0.25mm2 to 6mm2 DC connectors 5.7mm Surlok MC4 connectors MC4 Female: Staubli (Multi-Contact) PV-ADBP4-S2-UR-2,5 MC4 Male:

Staubli (Multi-Contact) PV-ADSP4-S2-UR-2,5 Operating temperature (1) 0 to +60⁰C (full rated operation up to 40⁰C) Cooling Forced air Maximum altitude 2000m Humidity (non-condensing) 95% Protection grade IP 20 Programmable relay Yes (3A, up to 30Vdc) Data communication 1x battery CAN port, 1x VE.Can port, VE.Direct port, Bluetooth Remote on/off terminal Yes STANDARDS Electrical safety EN-IEC 62109-1, EN-IEC 62109-2, Pollution degree 2 Emission/ Immunity EN-IEC 61000-3-11, EN-IEC 61000-3-12 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-4 1) When both the inverter and solar are running at full power, derating on the solar and, on more severe cases, also on the inverter can occur.

2) Peak power and duration depend on start temperature of heatsink. Mentioned times are with cold unit. 3) Efficiency reduces with higher battery voltages. 4) Minimum voltage for communication to start when the Multi HS19 is only powered by solar. 5) Check the manual for the full list of supported batteries. 6) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. 7) Future hardware revisions will support parallel operation.

Page 2