MultiPlus-II 2x120V Page 23 Error Indications flashing 10 13 16 on 11 14 17 Bulk LED on Absorption LED off flashing on Float LED off 18 21 24 flashing 19 22 25 on 20 23 26 Bulk, Absorption , Float LEDs Co de Description Cause/solution 1 Device is switched off because one of the other phases in the system has switched off. Check the failing phase. Not all, or more than, the The system is not properly configured. Reconfigure the system. 3 expected devices were found in the system. Communication cable error. Check the cables and switch all equipment off, and then on again. 4 No other device whatsoever detected Check the communication cables. 5 Overvoltage on AC-out. Check the AC cables.
10 System time synchronisation problem occurred. Should not occur in correctly installed equipment. Check the communication cables. 14 Device cannot transmit data. Check the communication cables (there may be a short circuit) 17 One of the devices has assumed ‘master’ status because the original master failed. Check the failing unit. Check the communication cables. 18 Overvoltage has occurred Check AC cables.