Operation en Operation ■ ■ Press the Release button and move the swivel arm to position 6 . ■ ■ Insert the bowl. The base of the mixing bowl must be inserted into the recess of the base unit. ■ ■ Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position. ■ ■ Put the ingredients to be processed into the bowl. ■ ■ Press the Release button and move the swivel arm to position 1 . ■ ■ Attach the cover. ■ ■ Set the rotary switch to the desired setting. W W Risk of injury!
Do not insert mains plug until all preparations for working with the appliance are complete. Attention! Do not operate the appliance without an accessory / tool in the operating position. Do not operate the appliance empty. Do not expose appliance or accessories to heat sources. Parts are not microwave-safe. ■ ■ Before operating the appliance and accessories for the first time, clean thoroughly; see “Cleaning and servicing”. Preparation ■ ■ Place the base unit on a smooth, clean surface. ■ ■ Unwind / pull out the cord. X Fig. B ■ ■ Insert the mains plug. Stirrer, whisk and kneading hook X Figure D : Stirrer (6a) for stirring dough, e.g.
cake mixture Adding more ingredients ■ ■ Switch off the appliance with the rotary switch. ■ ■ Set rotary switch to Ц and hold in place until the drive stops. ■ ■ Remove lid. ■ ■ Press the Release button and move the swivel arm to position 7 . ■ ■ Add ingredients or Whisk (6a) for whisking egg whites, cream and light dough, e.g. sponge mixture ■ ■ add more ingredients through the feed tube in the cover. Kneading hook with dough deflector (6b) for kneading heavy dough and mixing-in ingredients that ought not be cut (e.g. raisins and chocolate chips) After using the appliance ■ ■ Switch off the appliance with the rotary switch. ■ ■ Set rotary switch to Ц and hold in place until the drive stops.
■ ■ Remove mains plug. ■ ■ Remove lid. ■ ■ Press the Release button and move the swivel arm to position 6 . ■ ■ Take the tool out of the drive. ■ ■ Remove the bowl. ■ ■ Clean all parts. X “Cleaning and servicing” see page 18 W W Risk of injury from the rotating tools! While the appliance is operating, keep fingers clear of the mixing bowl. Do not change tools until the drive has come to a standstill - when the appliance is switched off, the drive continues running briefly. The appliance may only be operated when the unused drives have been safeguarded with the drive covers. ■ ■ Set rotary switch to Ц and hold in place until the drive stops. Note:
If the drive does not move, the swivel position has already been reached. 17 MUM44_8001056867.indb 17 25.01.2017 10:07:02