７ .Setting IP Address of the NA ７ Setting IP Address of the NA Perform the following procedure to set an IP address of the NA. 16 1. Select [Multiview Explorer]->[Configurations and Setup]->[HMI Settings] on the NA project. Double-click (or right-click-> Edit) to open the ”HMI Settings” table. Explorer]->[Configurations and Setup]->[HMI Settings] on the NA project. Double-click (or right-click-> Edit) to open the ”HMI Settings” table. 2. Select the icon on the “HMI Settings” table. 3. Set the IP address and subnet mask of Ethernet port 1 as follows; IP address：192.168.250.2 Subnet mask：255.255.255.0