omron — A-6 List of Options

Appendices  RS-422A/RS-485 Communication Cable  USB Memory It can be connected to the USB HOST port on the back of PT to perform the uploading, downloading, project operation and storage of related data. A-20 NB-series Programmable Terminals Setup Manual(V107) Models Descriptions NB-RSEXT-2M Only applies to the COM2 port of the NB series product, when performing communications using RS-422A/RS485, can be equipped with this communication cable. NB Model signal wire NB5Q /NB7W/ shield wire NB3Q-TWB NB10W-TWB Pin NO.

Signal Signal 1 SDB+ SDB+ Red 2 SD SD NB 3 RD RD Serial Port 4 RS Terminal D-Sub 5 CS Terminal 9Pin 6 RDB+ RDB+ WB hlu ite (Female) 7 SDA- SDA- e 8 RDA- RDA- B ro wn 9 SG SG Hood FG FG B la ck Conform to UL2464, AWG28 Cause a short circuit at terminal resistance. How to use: When NB5Q/NB7W/NB10W-TWB is used, open the connector of RS-422A/485 communication cable and cause a short circuit at PIN4 and PIN5. Make sure not to cause short circuit the other pins except PIN4 and PIN5. When the short circuit is completed, assemble the connector. When NB3Q-TWB Unit is used, set DIP switch SW3 to ON.

signal wire shield wire NB Model NB3Q-TWB NB5Q /NB7W/ NB10W-TWB NB Serial Port D-Sub 9Pin (Female) Pin NO. Signal Signal 1 SDB+ SDB+ 2 SD SD 3 RD RD 4 RS Terminal 5 CS Terminal 6 RDB+ RDB+ 7 SDA- SDA- 8 RDA- RDA- 9 SG SG Hood FG FG Recommended Purchasing Model Descriptions FZ-MEM2G USB disk with 2GB capacity manufactured by OMRON FZ-MEM8G USB disk with 8GB capacity manufactured by OMRON