NB-series Manuals NB-series manuals are organized in the sections listed in the following tables. Refer to the appropriate section in the manuals as required. Programmable Terminals Setup Manual (Cat. No. V107) (This Manual) 2 NB-series Programmable Terminals Setup Manual(V107) Section Contents Section 1 Part Names and Functions This section describes the names and functions of the various parts of an NB Unit. Section 2 Installing the NB Unit and Connecting Peripheral Devices This section describes the methods used to install the NB Unit and connect peripheral devices. Section 3 System Setting Mode This section describes the System Setting Mode.
Section 4 Calibrate Mode This section describes the Calibrate Mode. Appendices The appendices provide information on specifications, dimensions, wirings, and lists of the NB Units, the applicable PLCs and options. Programmable Terminals NB-Designer Operation Manual (Cat. No. V106) Section Contents Section 1 Introduction This section provides an outline of the NB-series PTs, including their functions, features, connection types and communication methods. Section 2 Installation and Startup of NB-Designer This section describes how to install and start the NB-Designer. Section 3 Functions of NB-Designer This section describes the functions of NB-Designer.
Section 4 Functions of NBManager This section describes the functions of NBManager. Section 5 Maintenance and Abnormality Handling This section describes the maintenance and check to prevent the abnormality occurrence and the handling of the abnormalities occurred in NB Unit. Section 6 Functions Related to External Memory This section describes the functions related to external memory. Section 7 Pictbridge Printing This section describes the Pictbridge printing function. Section 8 Web Interface This section describes the Web Interface function.
Appendices The appendices provide lists of the NB Units, the Communication Units, the applicable PLCs, the registers supported by PLC, and the list of NB- Designer functions.