7 ． EtherNet/IP Connection Procedure 7.3.2. Connecting Online and Transferring the Project Data Connect online with the Sysmac Studio and transfer the project data to the Controller. Always confirm safety at the Destination Device before you transfer a user program, configuration data, setup data, device variables, or values in memory used for CJ-series Units from the Sysmac Studio. The devices or machines may perform unexpected operation regardless of the operating mode of the CPU Unit. 21 1 Select Change Device from the Controller Menu. 2 The Change Device Dialog Box is displayed. Confirm that the Device and Version Fields are set as shown on the right.
* If the settings are different, select the setting items from the pull-down list. Click the OK Button. 3 If you changed the settings in step 2, the Build Dialog Box is displayed. Check the contents and click the Yes Button. 4 Select Communications Setup from the Controller Menu.