17 9 Create a new job and set the "Locate Shape", "OCR" and "Decode" tools. * In this chapter, you will create a job to output the detection points from the Locate Shape tool, the text string read by the OCR tool and character text decoded from a 2D Code using Serial (RS232C) communications. 10 Select the camera tool and set the trigger to "Serial Trigger,"RS232C 1: RS232C-1,T". 11 Click on Inspection Outputs and in its menu select “TCP/IP and Serial Out”. 12 In the popup dialog, set "Character output port" to "RS232C-1"