7.3.2. Start Sysmac Studio and Load the Project File Launch Sysmac Studio and load the Project File in to Sysmac Studio. Install Sysmac Studio and USB driver on the computer beforehand. 21 1 Make sure that the PC and controller are connected with the USB cable, and power on the controller. Launch Sysmac Studio and click on [Import]. * If the User Account Control Dialog Box is displayed at startup, select the option to start. 2 The [Import File] dialog opens. Select [OMRON F430 NJ PMCR232 _ _ _ C V100.smc2] and click [Open]. _ * Obtain the latest version of the project file from the OMRON Corporation website. 3 The [OMRON F430 NJ PMCR232 _ _ _ C V100] Project is displayed.
_ The left side of the screen is called "Multiview Explorer", the right side is called "Toolbox", and the center is called "Edit window". Multiview Edit Pane Tool Box Explorer * If the error message "Cannot compare the repositories, the version on the target different from the source." Is displayed, change the Sysmac Studio version to at least the version indicated in "5.2. Device Configuration" or higher.