35 4 The [Change PLC] dialog is displayed. From the [CPU type] pulldown list, select the CPU type and click [OK]. * In this document, [1300] is used. 5 In the [Change PLC] dialog, confirm that [USB] is set as the [Network type] and click [OK]. * If [USB] is not already set as the [Network type], select it from the pulldown menu. 6 From the menu bar, select [PLC] – [Connect]. 7 Change the display of PLC icon in the project workspace from [Offline] to [Program], and confirm that online connection with the controller is possible. * If [RUN] is displayed, perform steps 8 to 9 below to change to [Program].