7.4.4. Confirm Received Data In Sysmac Studio, check that the correct data is written to the controller variable. 1 Also confirm that [Online value] of [Local_Status.Done] indicating the program execution status is [True]. * You can see that the program ended normally. * If it ends with an error, [Local_Status.Error] becomes [True]. Refer to Step 2 again when correcting it. [When it ends normally] [When it ends with an error] 2 If the program ends normally, [When it ends normally] check that each error code is "0". * If the program ends with an error, an error code will be stored according to the error that occurred. Take corrective action according to 9.8. “Error Processing".
[When it ends with an error] 45