3.2.12. System Operation Check You execute the operation according to the programs transferred to the physical device and check the operation by comparing it with the simulation results using the function for data acquisition from the NJ-series CPU Unit to the Simulink. This function can be used when the data are synchronized between the Sysmac Studio and the NJ-series CPU Unit. Precautions for Correct Use The physical motor will run. Thoroughly read and understand the manuals for all devices that make up the system to ensure that the system is used safely.
Review the entire contents of these manuals, including all safety precautions, precautions for safe use, and precautions for correct use before the actual operation. 49 1 Select Online from the Controller Menu of the Sysmac Studio. 2 Select Synchronization from the Controller Menu of the Sysmac Studio.