Текст документа
No. 600 NOTTINGHAM ENGLAND Accessories and Ancillary Equipment for Series 10, Series 7 and 254 Plus Screwcutting Metal Turning Lathes Orders: All orders are accepted to our standard conditions of sale. Prices & Prices shown in the right hand column are inclusive of VAT at 17.5% on list prices. List prices excluding VAT: VAT are shown in the left hand column. We reserved the right to change prices ruling at date of despatch. Carriage: Is charged extra. Design: We reserve the right to change design and specification without notice.
INDEX Section 1 Cabinet Stands, Industrial Stands, Trays, Raising Blocks, Splash Guards, Anti-Vibration Mounts, Safe Work Lights, Coolant Equipment, Foot Operated Emergency Stop Switches, Replacement Switches (Revised October 2003) Section 2 Chucks, Backplates, Faceplates, Drill Chucks, Chuck Guards, Collets, Adaptors, Centres, Drill Pads, Reducing Sleeve, Die Holders Section 3 Steadies Section 4 Slide Rest Tools, Quick Setting Lathe Tools H.S.S.
and Carbide, Throw Away Tip Tooling, Holders and Inserts, Tool Boats, Tool Steel, Between Centres Boring Bars, Arbors and Flanges for Milling Cutters, Four Tool Turrets, Interchangeable Tooling Sets with Spare Holders, Rear Tool Post, Long Cross Slides, Taper Turning Attachments, Multi-Stops Section 5 Quick Change Gearbox, Metric Conversion Set, Changewheels, Thread Dial Indicators, Changewheel Conversion Sets, Fine Feed Tumbler, Leadscrew Handwheels, Tailstock Handwheels with Adjustable Dials, Clutch Units, Spindle Driving Handles Section 6 Milling Attachments - Self Motorising and Spindle Driven, Vertical Slides - Plain and Swivelling - Standard and Large Capacity, Boring/Milling Tables, Machine Vice, Raising Blocks, Dividing Attachments, Additional Index Plates, V Blocks, Tee Bolts, Tee Strips Section 7 Graving and Woodturning Rests Section 8 Lathe Covers, Oils and Grease, Touch-Up Paints, Drive Belts, Instruction Manuals / Laminated Sheets Section 9 Book List
Стр. 1
No. 600 Prices Pounds Sterling Carriage Extra Issued October 2003 Section 1 Cabinets / Stands / Trays / Raising Blocks / Vibration Mounts 2 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl.
VAT £ 20/207 Steel drip tray with drainplug, for machines admitting 330mm (13) for machines from serial number 159991 40.14 47.16 20/208 Steel drip tray with drainplug, for machines admitting 460mm (18) for machines from serial number 159991 43.62 51.25 20/190 Tray top cabinet stand fitted with mats and steel drip tray (20/207), for lathes admitting 330mm (13) between centres 274.39 322.41 20/191 Tray top cabinet stand fitted with mats and steel drip tray (20/208), for lathes admitting 460mm (18) between centres 293.49 349.85 80076 Set of four mounts for use with cabinet stand 70.25 82.54 20/200 Set of raising blocks (2 units) for machines up to serial No.
15591 includes pair 13291 bushes 86.27 101.37 20/024 Deep tray only with drain plug (as fitted to 20/038 stand) 44.56 52.36 20/024L Deep tray as above but for long bed lathes (as fitted to 20/225 stand) 47.02 55.49 13859/1 Splash guard for standard bed lathe 22.65 26.61 13871 Splash guard for existing lathes fitted to long bed tray top cabinet stand 49.05 57.63 (The above two splash guards are to suit 20/038 cabinet stand, or 20/024L deep trays only.) 30/065 Motor chip guard for existing machines (fitted as standard on all new Series 7 lathes), prevents swarf from entering right hand end of motor casing 27.52 32.34 20/025 Raising block with jack screws and securing screw....................pair 73.49 86.35 20/038 Tray top cabinet stand for standard bed machines, fitted with two cork mats, deep tray (20/024) and raising blocks (20/025) 354.72 416.80 80076 Set of four mounts for use with cabinet stand 70.25 82.54 20/226 Industrial stand for standard bed machines, with two cork mats and raising blocks (20/025) 545.65 641.12 20/227 Industrial stand for long bed machines, admitting 790mm (31) between centres, with two cork mats and raising blocks (20/025) 582.20 684.09 80075 Set of four mounts for use with industrial stands 72.70 85.42 20/228 Splash guard for 20/226 industrial stand 180.59 212.19 20/229 Splash guard for 20/227 industrial stand 186.63 219.29 95/238 Hook on door for 254 lathe, 95/238 67.12 78.87 95/168 Splash guard for standard lathe, for 254 plus models from serial number ZS164451 180.59 212.19 95/169 Splash guard for long bed lathe, for 254 plus models from serial number ZS164451 187.33 220.11
Стр. 2
No. 600 Prices Pounds Sterling Carriage Extra Issued October 2003 Section 1 Lights / Coolant Equipment / Emergency Stop Switches / Oils / Section 1 Paints / Replacement Switches 3 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl.
VAT £ 60/043F Halogen safe worklight and transformer, single phase, if supplied with machine 77.44 90.99 60/043R Halogen safe worklight and transformer, single phase, if supplied subsequently (Countershaft arm fitting drawing number 12281/1 required.) 42.89 50.40 95/037 Halogen safe worklight for existing models 95/188-95/208 inclusive (Transformer already provided in electrical specification.) 68.22 80.16 60264 Spare 20 watt, 12 volt halogen bulb (suits all current safe worklights) 10.23 12.02 60233 Spare 20 watt, 24 volt halogen bulb (suits older safe worklights) 11.20 13.16 Coolant equipment supplied separately for external mounting including pump, tank, delivery return pipes, delivery fitting for saddle with bracket, cock and telescopic pipe, also pump switch built into pump.
1488AEXT for three phase 355.08 417.22 1488BEXT for single phase 396.73 466.16 95/081 for single phase 396.73 466.16 95/083 for three phase 355.08 417.22 30/056 Telescopic suds delivery fitting, for existing coolant systems, including: bracket for attachment to the saddle, suds cock and telescopic pipe assembly, and A2815/1 pipe assembly 73.21 86.02 (Note: Give exact details (voltage, phase and periodicity) when ordering.) 61259 Emergency foot switch with 100mm (4) dia.
head 88.55 104.05 80202 Rocol 250HW soluble cutting oil - 1 litre 8.10 9.52 80201 Rocol RTD cutting spray - 300ml 16.22 19.06 80200 Rocol RTD cutting compound - 500 gram tin - ideal for tops and dies 11.95 88.55 14.09 104.05 80195 Preservative oil - 1 litre - ideal for applying to bright metal parts of a lathe and/or accessories if the machine and/or equipment is to be laid up for any length of time. Can be washed off with white spirits or substitute of turpentine 8.96 10.53 33/040 33/041 33/042 33/038 33/039 33/039 80203 Paints: 250ml tins of synthetic air drying enamel touch-up paint in colours:
Hammer finish - Silver Grey Hammer finish - Dark Grey Hammer finish - Green Grey Green Aquamarine Thinners - Trimite C30 (1 litre) 5.90 5.90 5.90 7.30 7.30 7.30 6.25 6.93 6.93 6.93 8.58 8.58 8.58 7.34 60/056 60/058 Replacement: Dewhurst & Partner Drum Type Reversing Switches Myford are unable to supply these switches as, in our opinion, they do not comply with current regulations for our application. As an alternative Myford supply a combined push button on/off starter with reversing switch, no-volt release, thermal overload protection to the motor, and turn to release mushroom head stop button.
Isolation and power inlet is via a CEE17 plug with 3 metres HO7 insulated 3 core cable, and power outlet to the motor by 1.4 metre HO7 insulated 5 core cable. (This switch is specially manufactured for Myford in Germany.) Reversing switch for Series 7 lathes fitted 3/4 hp, 230 volts, 50 Hz, AC single phase motor Reversing switch for Series 10 lathes fitted 3/4 hp, 230 volts, 50 Hz, AC single phase motor 98.44 98.44 115.67 115.67
Стр. 3
No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 2 Workholding Equipment (Chucks / Backplates) 4 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 3 & 4 JAW GEARED SCROLL CHUCKS Threaded Body / Plain Back Chucks Are provided to screw onto the spindle nose and do not require a backplate. This design eliminates the separate backplate, resulting in increased rigidity and reducing overhang, complete with inside and outside jaws. 76096 100mm (4) 3 Jaw G.S.
Myford-Toolmex Chuck with threaded body or, if the above is unavailable, we reserve the right to supply a similar chuck, but fitted backplate 101.70 119.50 76115 100mm (4) 3 Jaw G.S. Super Precision Pratt-Burnerd Chuck No. 9270-01005 for backplate mounting 224.20 263.43 76116 Set of three hexagon soft jaws to fit 100mm (4) 3 jaw Myford- Toolmex G.S. Chuck 48.96 57.52 76083 Set of three hexagon soft jaws to fit 100mm (4) 3 jaw Myford- Burnerd G.S.
Chuck 48.96 57.52 76086 Set of three additional hexagons to suit either 76116 or 76083 blanks 16.09 18.90 4 JAW INDEPENDENT CHUCKS Threaded Body / Plain Back Chucks 76106 125mm (5) 4 jaw Independent Myford-Toolmex Chuck with threaded body or, if the above is unavailable, we reserve the right to supply a similar chuck, but fitted backplate 162.15 190.52 76107 160mm (61/4) 4 jaw Independent Myford-Toolmex Chuck with threaded body or, if the above is unavailable, we reserve the right to supply a similar chuck, but fitted backplate 168.95 198.55
Стр. 4