Victron Nucleo GX — 14.4.3. Wiring

Nucleo GX Manual 14.4.2. Compatibility OneHelm is currently available for the following models: GPSMAP® 8400/8600 MFD series GPSMAP® 722/922/1222 Plus MFD series ActiveCaptain is also supported. The screenshot below shows ActiveCaptain with the Victron App. From Victron side, all GX devices can be used and are compatible. For details on detailed product compatibility regarding inverter/chargers and other components, see the main Marine MFD Integration by App chapter. 14.4.3. Wiring The Garmin MFD needs to be connected to the GX device using Ethernet. Its not possible to connect over WiFi. For the Ethernet connection, a Garmin adapter is required:

Newer generation Garmin MFDs that are equipped with BlueNet require different cables:

Page 130 Marine MFD integration by App Garmin part name Length Garmin part number Garmin Marine Network Cables (Large Connectors) 6ft/1.83m 010-10550-00 Garmin Marine Network Cables (Large Connectors) 20ft/6.1m 010-10551-00 Garmin Marine Network Cables (Large Connectors) 40ft/12.19m 010-10552-00 Garmin Marine Network Cables (Large Connectors) 50ft/15.24m 010-11169-00 Garmin Marine Network Cables (Large Connectors) 500ft/152.4m 010-10647-01 Garmin Marine Network Cable Coupler N/A 010-10580-00 Garmin Marine Network PoE Isolation Coupler N/A 010-10580-10 Garmin part name Length Garmin part number Garmin BlueNet™ Network to RJ45 Adapter Cable N/A 010-12531-02 Garmin BlueNet™ Network Cable (Right Angle) 8”/20.3cm 010-12528-13 Garmin BlueNet™ Network Cable 1ft/0.30m 010-12528-11 Garmin BlueNet™ Network Cable 6ft/1.83m 010-12528-30 Garmin BlueNet™ Network Cable 20ft/6.1m 010-12528-31 Garmin BlueNet™ Network Cable 40ft/12.19m 010-12528-02 Garmin BlueNet™ Network Cable 50ft/15.24m 010-12528-03 Garmin BlueNet™ Network Cable (Right Angle) 50ft/15.24m 010-12528-10