Victron Nucleo GX — 6.4. Connecting third-party NMEA 2000 tank senders

Nucleo GX Manual 6.3. Connecting a NMEA 2000 GPS In addition to USB GPS receivers, a NMEA 2000 GPS can be used for remote tracking of vehicles or boats in the VRM Portal. NMEA 2000 GPS compatibility requirements To work with Victron GX devices, the third-party NMEA 2000 GPS sender must meet the following criteria: Most NMEA 2000-compatible GPS units should function correctly. Tested and confirmed model: Garmin GPS 19X NMEA 2000 Physical connection to a GX device The GX device and NMEA 2000 network use different connector types. Two options are available: 1. VE.Can to NMEA 2000 cable (Victron) Enables connection between a GX device’s VE.Can port and a standard NMEA 2000 network.

The built-in fuse can be inserted or removed to choose whether Victron powers the NMEA 2000 network. See warning below regarding system voltage compatibility. 2. 3802 VE.Can Adapter by OSUKL Ideal for connecting a single NMEA 2000 device (e.g., a tank sender) to a VE.Can network. Can power lower-voltage NMEA 2000 networks directly from a 48 V Victron system. System voltage compatibility While Victron components accept up to 70 V on their CAN-bus ports, some NMEA 2000 devices do not. Many require a 12 V supply, and some may tolerate up to 30–36 V. Before connecting, always check the datasheets of all NMEA 2000 devices in the system. If lower network voltage is required:

Use the OSUKL 3802 VE.Can Adapter, or Use the VE.Can to NMEA 2000 cable without its fuse, and supply power to the NMEA 2000 network using a separate 12 V NMEA 2000 power adapter cable (not supplied by Victron). The VE.Can port on the GX device does not require external power to function. 6.4. Connecting third-party NMEA 2000 tank senders GX Devices can display data from compatible third-party NMEA 2000 tank senders. Compatibility requirements Must transmit the NMEA 2000 Fluid Level PGN, 127505 The NMEA 2000 device class/function must be either: General (80) with function code Transducer (190) or Sensor (170) Sensors (75) in combination with function code Fluid Level (150) Note:

Multiple fluid levels from a single device or function are supported, provided each tank is assigned its own fluid or data instance. Configuration support Some senders allow fluid type and capacity configuration directly via the GX device menu. Connecting supported non-Victron products Page 33 Parameter Required value Device Class 60 - Navigation Device Function 145 - Ownship Position (GNSS) Required PGN Must be transmitted in 129025 - Position (Latitude/Longitude) Optional PGN Must be transmitted in 129029 - Height, 129026 - Course & Speed