Nucleo GX Manual 6.7. Safiery Star-Tank tank level sensor The Safiery Star-Tank is a radar-based tank level sensor designed for top-mount installation. It can be affixed to non-metallic tanks using adhesive or mounted using the standard SAE 5-bolt pattern. The sensor communicates directly with a GX device via Bluetooth Low Energy (BLE). It is powered by a CR2744 coin cell battery, with an expected battery life of up to five years. For detailed product and mounting instructions, refer to the Star-Tank manual available on the Star-Tank product page . To connect the sensor to the GX device via Bluetooth, the GX device needs Bluetooth functionality.
For more information on Bluetooth requirements, limitations, and compatible USB Bluetooth adapters, see the Bluetooth connectivity requirements [35] section. 6.7.1. Installation Installing the Star-Tank sensor is straightforward. First, follow the Star-Tank installation instructions and configure the sensor. Once this is done, continue with the steps below to complete the setup on the GX device. Connecting supported non-Victron products Page 39 1. Make sure Bluetooth is enabled in the Bluetooth sensors menu (enabled by default). 2. Go to Settings → Integrations → Bluetooth sensors menu. 3. Move the Enable slider to the right to enable Bluetooth sensors. 4.
To find your Star-Tank sensor, scroll down until you see it. 5. To activate the sensor, move the slider to the right. It should now appear on the Device List. 6. Repeat steps 1..5 for more than one sensor.