Nucleo GX Manual 6.10.2. Configuration Sensor levels can be viewed in several locations within the GX environment: 6.10.3. Monitoring Connecting supported non-Victron products Page 46 1. Go to the Device list menu. 2. Scroll up or down and select the appropriate sensor. 3. Click or tap on the selected sensor to open its overview menu. 4. Click or tap on Setup to access the sensor's Setup menu. 5. In the Setup menu, you can change the type of the sensor. Available options are: Battery, Fridge, Generic, Room, Outdoor, Water Heater and Freezer. 6. After completing the setup, return to the Sensor overview menu. 7. Click or tap on Device to open the device settings menu. 8.
In the Device menu, you can assign a custom name to the sensor and view additional device information, such as connection type, product ID, and VRM instance. Repeat steps 1 to 8 if you want to set up additional sensors. • Devices list on the GX device • Levels page on the GX device (temperature and relative humidity) • VRM Dashboard (VOC index, NOx index, PM2.5 level, CO 2 level, RH, temperature, air pressure) • VRM advanced menu widgets (VOC index, NOx index, PM2.5 level, CO level, RH, temperature, air pressure) 2 • VRM App widgets (temperature and relative humidity)