Nucleo GX Manual 9. Configuration 9.1. Menu structure and configurable parameters After completing the installation and setting up the internet connection (if required), go through the menu from top to bottom to configure the GX device as needed. The menu structure is divided into 6 main categories: Devices: All connected devices General: Access control, Display, Firmware, Support Connectivity: Ethernet, Wi-Fi, Bluetooth, VE.Can VRM: Remote monitoring portal Integrations: Relays, Sensors, Tanks, PV, Inverters, Modbus, MQTT... System Setup: AC/DC system, ESS, DVCC, Battery... Page 81 Configuration Item Default Description Settings - The main menu.
Settings → Devices Various Various Lists all devices connected to the GX. Most entries include submenus with further details and configuration options. Settings → General Settings → General → Firmware Firmware - Read full feature description [96] Firmware version x.xx Shows the installed firmware version. Build date/time Shows build date and time. Image type Normal Shows the image type (Normal or Large). Online updates Submenu for online update control. Online updates: Auto update Check only Checks for new versions. Options: Disabled, Check only, Checkl and update. Online updates: Update feed Official release Options: Official release, Beta release. Image type Normal Normal or Large image.
Large adds Node-RED and Signal K server. Online updates: Check for updates Press to check Manual check for updates. Online updates: Update available Press to update Shown when updates are available. Install firmware from SD/USB Use this menu to install a new version from a microSD card or USB stick. Insert the card or stick that holds the new firmware .swu file. Stored backup firmware Submenu for switching between the current and previously installed firmware version. Note that for most system applications our advise is to keep automatic updates disabled; as is also the default factory setting.
Instead, update the system at a convenient moment; when people are on location and ready to revert to a previous system and/or troubleshoot in case of issues. Settings → General → Access & Security Access level User and User & Installer Set this to 'User' to prevent accidental and unwanted changes to the configuration. User & Installer has additional privileges and once changed from default requires a password. Password is available from your dealer.