TwinCAT NC Axes Extended position and velocity control loop with current/moment interface (servo drive ) 4.2 High/low speed axes The TwinCAT high speed/low speed axis type (two speed) allow the positioning of a high speed/low speed axis. Such a high speed/ low speed axis can be physically made up of a motor with two speeds (switching of the pole pair numbers), or alternatively by a motor that can be driven at two speeds with the help of a frequency converter. The typical positioning of such an axis is first of all made at high speed up to a parameterization distance away from the target position ( creep distance in pos. or neg. direction).
From this position you switch to low speed, so that the physical speed (actual speed) is reduced to a slower constant speed. The slow speed is then also switched off at a closer distance from the target (braking distance) and the stop brake is then activated after a parameterized time (delay time for brake incidence) . Numerical Control (NC) Basics 14 Version: 1.2