Hardware set-up without actual hardware 22.) Under the Group section in the Toolbox, scroll down until you see”Safety CPU Device.” 23.) Under the “Input Keyword” section, left click on(and hold) the “NX-SL330 Ver1.1” Safety CPU while dragging this next to the master coupler “NX-EIC202 Master.” Release the left mouse button when the orange bar appears. 24.) In the “group” section, scroll to the I/O modules being used. Follow the previous step for the I/O modules. Example shows the SID800 input module. (Added orange bar so you can see what it looks like before Sysmac Studio adds the module.) 25.) Up to 32 safety input and output modules can be added.
Up to 63 total (safety and standard input and output modules can be added. Symbols will appear below the module if incorrect version of modules is selected, power unit is exceeded, and too many modules have been added. 26.) Right click on the module for options such as delete, copy, cut, paste, undo, change model, edit unit operation settings, etc. QSG-NX-S-STANDALONE - Version 3.2 Feb. 27, 2015 Page 14 OMRON AUTOMATION & SAFETY • © 2015 Omron Electronics LLC • www.omron247.com